FSX/FS2004 Bf 109E German WW2 Fighter
In late 1938, the Bf 109E entered production. To improve on the performance afforded by the rather small 441515kW (600700PS) Jumo 210, the larger Daimler-Benz DB 601A engine was used, yielding an extra 223kW (300PS) at the cost of an additional 181kg (400lb). To test the new 1,100PS (1,085hp, 809kW) DB601A engine, two more prototypes (V14 and V15) were built, each differing in their armament. While the V14 was armed with two 7.92mm (.312in) MG 17s above the engine and one 20mm MG FF in each wing, the V15 was fitted with the two MG 17s mounted above the engine only.[13] After test fights the V14 was considered more promising and a pre-production batch of 10 E-0 was ordered. Batches of both E-1 and E-3 variants were shipped to Spain for evaluation, and received their baptism of fire in the final phases of the Spanish Civil War.
E-1
The production version E-1 kept two 7.92mm (.312in) MG 17s above the engine and two more in the wings. Later, many were modified to the E-3 armament standard. The E-1B was a small batch of E-1s becoming the first operational Bf 109 fighter bomber, or Jagdbomber (usually abbreviated to Jabo). These were fitted with either an ETC 500 bomb rack, carrying one 250kg (550lb) bomb, or four 50kg (110lb) bombs. The E-1 was also fitted with the Reflexvisier "Revi" gunsight. Communications equipment was the FuG 7 Funkgert 7 (radio set) short-range radio apparatus, effective to ranges of 4856km (3035mi). A total of 1,183 E-1 were built, 110 of them were E-1/B.[11][12]
E-2
Only very limited numbers of the E-2 variant were built, for which the V20 prototype served as basis. It was armed with two wing mounted, and one engine mounted Motorkanone MG FF cannon, which gave considerable trouble in service, as well as two synchronized MG 17s cowl machineguns. In August 1940, II./JG 27 was operating this type.[14][15]
E-3
To improve the performance of the Bf 109E, the last two real prototypes, V16 and V17 were constructed. These received some structural improvements and more powerful armament. Both were the basis of the Bf 109 E-3 version. The E-3 was armed with the two MG 17s above the engine and one MG FF cannon in each wing.[16][17] A total of 1,276 E-3 were built, including 83 E-3a export versions.[11][12]
E-4
The E-3 was replaced by the E-4 (with many airframes being upgraded to E-4 standards starting at the beginning of the Battle of Britain) which was different in some small details, most notably by using the modified 20mm MG-FF/M wing cannon and having improved head armor for the pilot. With the MG FF/M it was possible to fire a new and improved type of explosive shell, called Minengescho (or 'mine-shell') which was made using drawn steel (the same way brass cartridges are made) instead of being cast as was the usual practice. This resulted in a shell with a thin but strong wall, which had a larger cavity in which to pack a much larger explosive charge than was otherwise possible. The new shell required modifications to the MG FF's mechanism due to the different recoil characteristics, hence the MG FF/M designation.
The cockpit canopy was also revised to an easier-to-produce, "squared-off" design, which also helped improve the pilot's field of view. This canopy, which was also retrofitted to many E-1s and E-3s, was largely unchanged until the introduction of a welded, heavy-framed canopy on the G series in the autumn of 1942. The E-4 would be the basis for all further Bf 109E developments. Some E-4 and later models received a further improved 1,175PS (1,159hp, 864kW) DB601N high-altitude engine; known as the E-4/N; owing to priority being given to equipping Bf 110s with this engine, one fighter gruppe was converted to this version, starting in July 1940.[18] The E-4 was also available as a fighter-bomber with equipment very similar to the previous E-1/B. It was known as E-4/B (DB 601Aa engine) and E-4/BN (DB 601N engine). A total of 561 of all E-4 versions were built,[12] including 496 E-4s built as such: 250 E-4, 211 E-4/B, 15 E-4/N and 20 E-4/BN.[11]
E-5, E-6
The E-5 and E-6 were both reconnaissance variants with a camera installation behind the cockpit. The E-5 was a reconnaissance variant of the E-3, the E-6 was a reconnaissance variant of the E-4/N. Twenty-nine E-5s were built and nine E-6 were ordered.[11]
E-7
The E-7 was the next major production variant, entering service and seeing combat at the end of August 1940.[19] One of the limitations of the earlier Bf 109E was their short range of 660km (410mi) and limited endurance, as the design was originally conceived as a short-range interceptor. The E-7 rectified this problem as it was the first subtype to be able to carry a drop tank, usually a 300 L (80 US gal) capacity unit mounted on a rack under the fuselage, which increased their range to 1,325km (820mi). Alternatively, a bomb could be fitted and the E-7 could be used as a Jabo fighter-bomber. Previous Emil subtypes were progressively retrofitted with the necessary fittings for carrying a drop tank from October 1940.[20] Early E-7s were fitted with the 1,100PS DB 601A or 1,175PS DB 601Aa engine, while late-production ones received 1,175PS DB 601N engines with improved altitude performance  the latter was designated as E-7/N.[21] A total of 438 E-7s of all variants were built.[22]
Bf 109E variants and sub-variants
* E-0 (Pre-production aircraft with 4  7.92mm/.312in MG 17 machine guns)
* E-1 (Similar to E-0) 
o E-1/B (Fighter-bomber version of E-1, usually with DB 601Aa)
* E-2 (Limited production, additional Motorkanone engine mounted MG FF cannon, otherwise as E-3)
* E-3 (Similar to E-1 but 2  20mm MG FFs in the wings instead of the MG 17)
* E-4 (Armor and structural improvements, change of MG FF cannons to MG FF/M. "Square" canopy) 
o E-4/B (Fighter-bomber version of E-4, 1  250kg/550lb bomb, usually with DB 601Aa)
o E-4 trop (Version of E-4 modified to serve in tropical regions)
o E-4/N (E-4 with DB601N engine)
o E-4/BN (Fighter-bomber version of E-4/N, 1  250kg/550lb bomb)
* E-5 (Recon version of E-3, camera equipment, 2  7.92mm/.312in MG 17)
* E-6 (Recon version of E-4/N, camera equipment, 2  7.92mm/.312in MG 17)
* E-7 (Similar to E-4 but with optional 300 L drop tank) 
o E-7/N (Similar to E-4/N but with optional 300 L tank)
o E-7/NZ (also known as E-7/Z, an E-7/N with additional GM-1 nitrous oxide injection system)
o E-7/U2 (Ground attack variant of E-7 with additional armor)
* E-8 (Long-range version of E-1 using drop tank installation of E-7, 4  7.92mm/.312in MG 17)
* E-9 (Recon version of E-7/N, drop tank, camera equipment, 2  7.92mm/.312in MG 17)

Effects
--------
-On startup there is automatic engine smoke.
-Then follow the exhaust flames with smoke.
-Wing vortex effect appears by default at 2.5g or quick roll rate.
-Continuous blue flames with smoke if engine is running .
-Automatic wingslats open under 100mph and +3G.
-Nose guns with flash, smoke and falling cartridges can be triggered with the standard Strobe key (O).
It is much nicer however if you put the FS2004/FSX standard Strobe key (O) to the trigger from your joystick. You can change this in the Key menu.

Installation:
========
-Unzip " Me109E" into a temporary file and move the "Me109E" folder into the main Aircraft directory.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-Read instructions carefully when installing the gauges ,  say YES...when asked if the gauges sources should be trusted. If you say no....most of the gauges are not going to work !
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-Leave all gauges and .Cab in the Me109E panel folder. (You can also move them to the flightsim\gauges folder.Let them overwrite original gauges, this cannot harm.)
-Copy the effects into the   Microsoft Games\Flight Simulator ...\effects folder and the 20can.wav into the Microsoft Games\Flight Simulator ...\sound folder. Copy the tracer1.bmp into the effects\texture folder.
IMPORTANT : For FS2004 change the  FS9_Wing_Guns.fx into FX_Wing_Guns.fx
and remove the original one.
-Lights use panel light shift+L key.
-exhaust effects use wing/taxi/logo. Automatic
-guns use strobe.
-CTRL-L commands lights.
If having trouble with prop and cockpit transparencies in FSX acceleration, copy the glass.bmp and propdisk3. bmp files from the Acceleration.texture into the Me109E texture folder.


CREDITS
=======
Special thanks to : 
-GMAX for the drawing program and Microsoft for their makmdls.mdk.
-Morton for most of the textures.
-Aaron R swindle for the sounds.

LEGAL:
======
The project is released as freeware.  You may modify it and repaint it. You may upload this file to another website as long as it is not for profit.  
You need the written permission of the original authors to use any of these files for commercial purposes, otherwise a simple credit would be nice. Non commercial repaints-remakes are  welcome but I would appreciate very much receiving a copy of your model.
This file should not cause any problems with your computer, but I accept no responsibility if you think it does


Happy Landings!!

 A.F.Scrub, January 2013. 
af_scrubbypc@hotmail.com
